Need Help? Visit our web site for replacement parts, product support, a list of authorized service centers in the US and customer service contact information
at www.razor.com. Please have the product I.D. code (located on the white label of your product) available for better assistance. Additional Customer Service
contact information is listed at the back of this manual.
BEFORE YOU BEGIN
Remove contents from box. Remove the packing material used to protect the components from damage during
shipping. Inspect the contents of the box for scratches in the paint and dents that may have occurred during shipping.
Because your scooter is assembled and packed at the factory, there should not be any problems, even if the box has a
few scars or dents.
WARNING:
DO NOT USE NON-RAZOR
PRODUCTS WITH YOUR
SCOOTER. Razor scooters have
been built to certain Razor design
specifications. The original
equipment supplied at the time
of sale was selected on the basis
of its compatibility with the
frame, fork and all other parts.
Certain aftermarket products may
not be compatible and will void
the warranty.
Product ID Locations:
1. Side of deck plate
2. Box - side of UPC (not shown)
Box Contents:
• Scooter
• Two (2) Lithium batteries
(Spark 2.0 only)
• Owner’s manual
T-Bar
Fork
Handlebars
Brake
Spark
Cartridge
Spark Bar
Quick-Release Lever
Extension Tube
Folding Mechanism/
Joint Release Lever
LED Lights for Spark 2.0 (not shown)
Battery Compartment (Spark 2.0 only)
LED Lighted Wheels
(excludes Spark)
Spark_Series_MAN_US_141117.indd 2 11/17/14 6:23 PM