WARNING: Failure to
properly engage the spring-loaded
buttons may cause the handlebars
to dislodge while riding and may
cause rider to lose control and
fall. When correctly engaged, the
handlebars will not rotate nor move
sideways, and the spring-loaded
buttons will be clearly visible in the
holes on the T-bar.
WARNING: Check
handlebar grips and end caps
regularly for wear or damage
are designed to aid in gripping
handlebars and to provide some
protection against possible impact.
Replace immediately if worn, torn,
damaged or missing.
Assembling the Handlebars
3
Need Help? Visit our web site for replacement parts, product support, a list of authorized service centers in the US and customer service contact information
at www.razor.com. Please have the product I.D. code (located on the white label of your product) available for better assistance. Additional Customer Service
contact information is listed at the back of this manual.
2 Secure the handlebars into
the T-bar by depressing the spring-
loaded buttons and inserting the
handlebars into the T-bar.
3 Make certain BOTH handlebars
are properly locked onto the T-bar.
1 Raise handlebars up so they are
level with the T-bar.
1 To release the folding mechanism,
place the scooter on the ground and
place one foot on the deck plate.
Push the joint release lever down
(to raise) or up (to lower) the T-bar
until it is securely locked in the
desired upright or folded position
for riding or storage.
Note: The joint release lever
is spring-loaded and will
automatically lock in the upright
position when fully upright or
folded position when fully lowered.
WARNING:
Keep fi ngers clear of the folding
mechanism when folding or
unfolding the scooter. Make sure
others are standing clear.
Folding and Unfolding the Scooter
ASSEMBLY AND SET-UP
Spark_Series_MAN_US_141117.indd 3 11/17/14 6:23 PM
To Next Page
Loading...
Need help?
General
Weight and Dimensions
