TV 19LA30RQD/22LA45RQD has a built-in DVD player module, which you can use to watch DVD disk. The
following operation guide gives the DVD module instruction.
Press INPUT button on remote control, select “DVD” in the Source Select menu (see page 21), then press
ENTER or right arrow to enter DVD mode. The DVD will start playing automatically if there is a disk in DVD
module. If not, the TV will display a standby screen as shown. And a “No Disc” message will appear on screen.
DVD mode of TV 19LA30RQD/22LA45RQD
1. How to enter DVD mode for TV 19LA30RQD/22LA45RQD
Insert the DVD disk with reflector surface facing the front of TV.
Note: The TV will turn to DVD mode automatically when you insert a disk, no matter which mode it is now.
Disk reflector surface facing toward the TV front.
Note: Do not insert with much strength.
Insert disk gently and the DVD module will inhale the
disk automatically.
2. Insert a disk to DVD player
You can control the DVD playing with keypad on DVD module or with remote control.
For operating information, see next page.
3. DVD control
DVD Operations
34
No Disc
To Next Page
Loading...
Need help?
General
