AC
100-120V
60Hz
ANT/
CABLE
The first step in connecting your TV is obtaining the signal. Your TV 26LB33RQ/32LB30RQ/32LB45RQ have a side panel, which
allows you to receive analog and/or digital television channels via ANT/CABLE jack.
Before connecting your TV, determine using an antenna or a cable service to obtain the signal.
A. Antenna
Connect the antenna to TV via coaxial cable on ANT/CABLE jack of the side panel. You are ready to receive air local digital and
analog channels.
B. Cable TV service
Connect the cable TV wall jack to TV via coaxial cable on ANT/CABLE jack of the side panel. You are ready to receive off-air local
digital and analog channels.
C. Set-Top Box
If you use a set-top box, you may need to call your cable company or satellite service provider, which use a special connection,
please refer to the user’s guide of set-top box.
Note: Do not plug the AC cord until you have accomplished all the connections.
AC Power Cord
(Connect after all the other connections are done.)
Antenna Cable TV
Or
TV Signal Connection
10
WALL
OUTLET
To Next Page
Loading...
Need help?
General
