TV Jacks Explanation
16
E A D H
N E O P H
Y b P r P
R
R L
L
U T I N P P C
A G V
n I - o i d A u
T / A N
E L B C A
l t a D i g i
t O u - o i d A u
1
2 3
4
I N
ANT/CABLE: Connect to receive the signal from your antenna or cable via coaxial cable.
HEAD PHONE:
Connect a 3.5mm headphone for personal audio.
Digital Audio-out:
Connect a coaxial cable for digital audio output.
AUDIO-IN L/R, Video In: Connect an AV device that has composite video jacks, such as a VCR
• AUDIO-IN L: Left audio channel connection. The left audio connector is usually white. For mono audio
sources, be sure to use the left AUDIO INPUT.
• AUDIO-IN R: Right audio channel connection. The right audio connector is usually red.
COMPONENT Y/Pb/Pr: Connect a device that has component video jacks, such as a DVD player.
• Y/Pb/Pr (Component Video): They provide good picture quality because the video signal is separated into three
components. Use three video-grade or component video cables for the connection. When using Y/Pb/Pr, make sure you
connect left and right audio cables to the Audio L and Audio R jacks.
HDMI1, 2, 3, 4: (High-Definition Multimedia Interface) It provides an uncompressed digital connection that
carries both video and audio data by way of an integrated mini-plug cable.
PC INPUT VGA: Connect your computer or other device with a VGA output to this jack using a 15-pin, D-sub cable.
PC INPUT Audio-In: Use to obtain sound when a PC is connected to TV. Use 3.5mm stereo mini-pin cable to connect PC to TV.
USB: Connect your USB storage device to enjoy music/photo files on your TV. (Also used for service purpose)
or a DVD player. To access device connected to these jacks, press the INPUT button on your
remote; then press the up/down arrow to select AV. Press the ENTER button at last to confirm.
To access device connected to the Y/Pb/Pr jack, press the INPUT button on your remote; then press the up/down arrow to
select Component. Press the ENTER button at last to confirm.
AUDIO OUTPUT L/R:
Connect double-channel coaxial cables for analog audio output.
Note:
Digital Audio-out and AUDIO OUTPUT L/R are supposed to be connected to audio power
amplifier, which provides smoother and more powerful sound performance.
USB
To Next Page
Loading...
Need help?
General
