13
Chapter 2: The Remote Control
Find out if the remote can operate your TV
This remote control is designed to operate most RCA, GE, and Proscan TVs.
1. Press the TV button.
2. Press the ON•OFF button (if the TV turns on or off, this remote will
operate the TV).
Tune to the TV’s Input Channel
To watch DVDs, the TV needs to be tuned to the Video Input channel that
corresponds with the jacks you used to connect the DVD Player to the TV.
1. Press the TV button on the remote.
2. Press the INPUT button until you see the picture from the DVD Player
(the DVD main menu, or if a disc is playing, you’ll see the movie on the
screen). If you need more help to find your Video Input channel, go to
page 61.
This remote operates most
RCA, GE, and Proscan TVs.
1590940A 3/7/02 9:21 AM Page 13
To Next Page
Loading...
Need help?
General
