Battery saver
Your universal remote control saves battery power by automatically turning
off if any key is pressed for more than 60 seconds. This saves your battery
life should your remote get stuck in a place where the keys remain depressed,
such as between sofa cushions.
Program your remote
To use this universal remote with your home entertainment system, first you
need to program it to control your devices. The following set of instructions
demonstrate how to use the Auto Code Search function.
The Auto Code Search goes automatically through all the codes for the
device you’re trying to control. It’s the easiest method, but it can
sometimes take longer than some of the other programming methods.
The Brand Code Search searches through the codes for select brands
of devices. It’s not as easy as the auto code search, but it can be faster.
The Direct Code Entry lets you enter a code from the accompanying
code list for your brand of device. It’s not as easy as the other methods,
but it’s potentially the fastest method.
The Manual Code Search lets you manually go through all the codes
for the device you’re trying to control.
To Next Page
Loading...
Need help?
General
