NO: Press REVERSE again (please see Figure 8). The remote tests the
next code in the batch. Keep pressing REVERSE every 2 seconds until
your device turns back on. When it does, press STOP.
Note: If you accidentally press the REVERSE key after your device turns
on, press the FORWARD key. Then, wait two seconds to see if your device
turns off again.
Testing the Code for Maximum Functionality
1. Try a variety of the device’s functions with the remote. If some device
features don’t work, go to the next step to try a different code.
Figure 8. Press REVERSE again on your remote if the device did not turn off.
To Next Page
Need help?
General
