PLAYING A CD
1. Press PLAY/PAUSE I_11 button to play all the tracks in order, starting with
Track 1. The current track number appears in the display.
Note: Press PLAY/PAUSE I_11 button to temporarily stop the CD. The playing time
flashes in the display. Press PLAY/PAUSE I_11 button again to resume playing the
CD.
2. Adjust VOLUME to a comfortable level.
3. Press STOP • to stop playing the CD before all tracks have played. Wait a few
seconds for the CD to stop turning, then press PUSH OPEN/CLOSE to open the
CD compartment door and remove the CD.
AUTOMATIC SEARCH
Automatic search lets you quickly locate the beginning of any track on the CD,
including the track currently playing.
When the CD is playing:
• Press TUNINGSEARCH/SKIP_ buttons to skip to the beginning of the previous
track.
• Press TUNING SEARCH/SKIP _ buttons to skip to the beginning of the next track.
If the CD is stopped, press TUNING SEARCH/SKIP _ or []>1_ buttons repeatedly
until the display shows the track number of the track you want to play, then press
PLAY/PAUSE I_11. The CD player will start playing the selected track.
Note: At the beginning of a CD, you can only search forward. At the end of a CD,
you can only search backward.
TRACK SEARCH
In PLAY or PAUSE mode, press and hold TUNING SEARCH/SKIP _ button to move
forward through a track at high speed.
In PLAY or PAUSE mode, press and hold TUNING SEARCH/SKIP _ button to move
backward through a track at high speed.
INTRODUCTION PLAY
To have an introduction pf the CD, press the INTRO button. This mode then plays
10 seconds of each track of the CD. In INTRO mode, "INTRO" appears in the
display. This mode can be switched off by pressing the INTRO or STOP • button.
To Next Page
Loading...
Need help?
General
