Lock
Slide the control switch on the main
unit to HOLD position to lock the but-
tons on the main unit to avoid accidental
activation of unwanted functions.
The hold icon will show on the display
when the control is locked.
Do the same to lock the buttons on the
remote control (For RP2512 only).
Resume
When you power off the unit (without
disconnecting the power supply), resume
function is automatically activated. It
stores the following settings and modes:
Mode (Repeat/Repeat All/Random) and
EQ setting (Bass Boost). When play
mode is on again, the unit resumes to
these settings.
To automatically store current track
when you stop CD playback, press the
stop button twice.
Repeating/Random Playback
In normal playback mode, press
st•mono repeatedly to select various
playback options:
1. Replay the entire CD.
2. Replay the current track.
3. Random Playback. The icon will
flash on the display. Press play/pause
to activate random playback. The
icon will stop flashing and remain on the
display.
4. Press again to de-select the function.
In Program mode (refer to page 8 for
Program details), press st•mono repeat-
edly to select:
1. Replay the program.
2. Replay the current track in the
program.
3. De-select the function.
Bass Boost
Press to turn bass boost on and off.
EN
7
CD Player
Note:
Remember to slide the
control switch to ON posi-
tion to activate the control again.
To Next Page
Loading...
Need help?
General
