RCA RP5012 User Manual

Setting the time
7
Year/Date/12/24/Time
Setting
With this function, you can always
read on the display the recording date
and time of your recorded messages.
Follow the steps below for time
setting.
You can still use this unit for normal
recording without setting the time.
However, no correct recording date
and time can be referred for your
recorded messages and the display will
keep flashing when the unit is turned
off.
1. Turn on the unit.
2. Press MENU repeatedly to enter
Time setting mode.
3. When “YEAR”
flashes, the digits
of the year blinks
(default is 2002).
Press REVERSE or
FORWARD to
increase/decrease
the number, press MENU to
confirm.
4. Once the year is entered , the digits
in the month
field will blink
(default is 01).
Press REVERSE or
FORWARD to
increase/decrease
the number, press MENU to
confirm.
5. Once the month is entered, the
digits in the day will blink(while the
digits in the month field stop
blinking). Press REVERSE or
FORWARD to increase/decrease the
number, press MENU to confirm.
6. Once the date is
entered, you can
choose between
12/24 hour clock
display by pressing
REVERSE /
FORWARD, then
press MENU to
confirm.
7. Once the time is entered, the digits
in the hour field will blink (default
setting is 12 (12
hour mode) & 0
(24 hour mode).
Press REVERSE or
FORWARD to
increase/decrease
the number, press
MENU to confirm.
TipsTips
TipsTips
Tips: Press
STOP STOP
STOP STOP
STOP to exit to Stop
mode.
EN
RP5010 8/9/02, 6:00 PM9

RCA RP5012 Specifications

General

Brand	RCA
Model	RP5012
Category	Voice Recorder
Language	English