PLAYING AND LOADING DISCS SIMULTANEOUSLY
Your 3 Disc Changer Audio System has one other feature that you simply
cannot resist; while the system is playing a disc, you can open the CD
compartment tray to unload the other 2 discs and re-load 2 new ones
without interrupting the playing music.
Let's say if you're playing disc 2 and you want to replace discs 1 and 3 with
two other discs. All you'd have to do is press OPENICLOSE once to slide out
the CD compartment tray, unload the two discs you want to replace, reload
one or two other discs, then press OPEN/CLOSE again to slide the tray back
in, and it's done! Now you can listen to the newly loaded discs 1 or 3, just
press 1-2-3 DISC for rotating the tray to different discs.
SHUFFLE PLAY
With this function the system plays the tracks out of its original recorded
sequence and you have quite a few choices of how the tracks can be
shuffled. You can:
• Repeatedly shuffle play one disc,
• Repeatedly shuffle play all loaded discs,
• Shuffle play the tracks of all discs (playing each track only once) or
• Shuffle play the tracks of one disc (playing each track only once).
Take your pick and follow the steps to set the system playing the way you like.
REPEATEDLY SHUFFLE PLAY WITHIN ONE Disc
1. If discs are not already loaded or selected, follow the section on
LOADING DISCS.
2. Press REPEAT repeatedly until the display shows "REPEAT I DISC".
3. Press SHUFFLE and the display shows "SHUFFLE" and begins CD play
automatically.
REPEATEDLY SHUFFLE PLAY ALL Discs
1. If discs are not already loaded or selected, follow the section on
LOADING DISCS.
2. Press REPEAT repeatedly until the display shows "REPEATALL DISCS".
3. Press SHUFFLE and the display shows "SHUFFLE" and begins CD play
automatically.
12
To Next Page
Loading...
Need help?
General
