CLOSED CAPTIONS:
This function doesn’t work if the DVD hasn’t the closed caption. If the captions is OFF, press
[SUBTITLE ]key on the remote control to make caption on.
SCREEN SAVER:
If the SCREEN SAVER is set ON and the unit is switched on without a disc playing for several
minutes, a moving picture appears on the screen, and the unit will go to standby mode after 20
minutes. You can press [STANDBY] key on the remote control to wake it up.
LAST MEMORY
When this function is on, the unit can memorize the time elapsed from the last time you played
the disc. When playing next time, it will resume playing from the memorized time.
Audio setup page
ANALOG AUDIO SETUP:
DOWNMIX:
Use arrow button to move the scroll to choose one.
LT/RT: The audio out is Left and Right channel format even if the original sound is 5.1CH format.
STEREO: The audio out format is stereo even if the original sound is 5.1CH format.
SPDIF OFF: No digital output( coaxial off), only analog audio output .
ALL: If this item is selected, you can set up the RAW.
PCM ONLY: In SPDIF/PCM mode, setup PCM channel according to your preference.
LPCM OUT :
Select PCM frequency at 48kHz or 96kHz.
Note: Some amplifiers don't support 96kHz sampling which will effect the coaxial output.
DIGITAL AUDIO SETUP PAGE :
DIGITAL OUTPUT:
SYSTEM SETUP
- 51 -
To Next Page
Loading...
Need help?
General
