6
EN
Settings
Showing the Demonstration
Press DEMO to turn on/off demonstration mode.
The demonstration scrolls through all display
operations.
Display Clock / Timer
Setting the Clock
1. Press and hold CLOCK to enter clock setting
mode. The hour flashes on the display.
2. Press SKIP BACKWARD or SKIP FORWARD
on the main unit or PRESET or PRESET
on the remote control to set the hour .
Press CLOCK to shift to minute digits.
3. Press SKIP BACKWARD or SKIP FORWARD
on the main unit or PRESET or PRESET
on the remote control to set the minute .
4. Press PROG/SET to save settings.
Press STOP to quit settings.
Note:
• When system is ON, you can press CLOCK to
display the current time for about 2 seconds.
Setting the Timer
1. Press and hold TIMER until the ON and clock
hour flashes on the display ( ON - timer on time ).
2. For setting time, press SKIP BACKWARD or
SKIP FORWARD on the main unit or PRESET
or PRESET on the remote control to set
the hour and then press TIMER to shift to minute
digits.
3. Press SKIP BACKWARD or SKIP FORWARD
on the main unit or PRESET or PRESET
on the remote control to set the minute.
4. Press TIMER to change to OF (timer off time)
with clock time flashing. Repeat steps 2 & 3 for
timer off time setting.
5. Press TIMER to select source. Press SKIP
BACKWARD or SKIP FORWARD on the
main unit or PRESET or PRESET on the
remote control to select between CD / TUNER /
TAPE / REC TU .
6. Press TIMER to set volume. Rotate the VOLUME
control to select desired volume level.
7. Press PROG/SET to save settings.
Press STOP to quit setting.
The timer is automatically activated once timer
setting is saved.
Activating the Timer
Press and release TIMER to turn on/off the alarm.
The timer is active when the clock icon is lit.
Sleep Mode
You can select the time interval in minutes before
the unit turn off automatically. Press SLEEP to select
among OFF, 120, 90, 60, 45, 30, 15 and 5 minutes.
RS2300 EN 7/7/03 11:34 AM Page 10
To Next Page
Loading...
Need help?
General
