EN
5
Display Settings
Display
Showing Demonstration
Not operational in CD mode. Press DIMMER•DEMO
/ CD INFO to turn on/off demonstration mode. The
demonstration scrolls through all display operations.
Display Clock / Timer
Setting the Clock
1. Press and hold CLOCK until the hour flashes on
the display.
2. Press DIGITAL TUNING or to set the
hour and then press CLOCK to shift to minute
digits.
3. Press DIGITAL TUNING or to set the
minute.
4. Press PROG•SET to save settings and STOP to
quit setting.
Setting the Timer
1. Press and hold TIMER until the ON appear with
the hour flashing ( ON - timer on time )
2. For setting time, press DIGITAL TUNING or
to set the hour and then press TIMER to shift
to minute digits.
3. Press DIGITAL TUNING or to set the
minute.
4. Press TIMER to change to OF (timer off time)
with hour flashing. Repeat steps 2 & 3 for timer
off time setting.
5. Press PROG•SET to save settings or STOP to
quit setting.
Activating the Timer
Press and release TIMER to turn on/off the timer. The
timer is active when the clock icon is lit.
Adjusting the Display Brightness
1. Press and hold DIM
MER•DEMO / CD
INFO for more than 2
seconds.
2. While the dimmer is displayed, press and
release DIMMER•DEMO / CD INFO repeatedly
to select the desired level (DIMM 1 - 3).
Sleep Mode
You can select the time interval in minutes before
the unit turns off automatically. Press SLEEP on the
remote to select among OFF, 90, 60, 45, 30, 15 and 5
minutes. (Remote Only)
The sleep icon flashes on the display when sleep
mode is activated.
When sleep is activated, press SLEEP once to view
remaining sleep time.
Press SLEEP again when the remaining sleep time is
displayed to change sleep time.
DIMM 2
Note:
When system is ON, you can press
CLOCK to display the current time
for about 2 seconds.
Note:
Sleep is automatically de-activated
when the unit is turned off.
Note:
The wake up timer source will be
the source you are in when set-
ting the timer.
To Next Page
Loading...
Need help?
General
