EN
2
Connections and Setup
Things to consider before you
connect
s%NSURETHATTHEMAINSSUPPLYINYOUR
house complies with that indicated on the
identification sticker located on the back of
your unit.
s)NSTALLYOURUNITHORIZONTALLYAWAYFROM
any source of heat (fireplace) or appliances
creating strong magnetic or electric fields. The
components of this unit are sensitive to heat.
4HEMAXIMUMAMBIENTTEMPERATURESHOULD
NOTEXCEED#&
s,EAVEENOUGHSPACEAROUNDTHEUNITTOALLOW
adequate ventilation: 10 cm/4 inches on either
side and above the top, and 5 cm/2 inches at
the rear.
s4HEHUMIDITYOFTHEROOMSHOULDNOTEXCEED
75%. If you have to use the unit outdoors,
DONOTEXPOSEITTORAINORSPLASHINGWATER
4HEAPPARATUSSHOULDNOTBEEXPOSEDTO
dripping or splashing and no objects filled
with liquids, such as vases, should be placed
on the apparatus.
s-OVINGTHEUNITFROMACOLDPLACETOA
warm one can cause condensation on
some components inside the unit. Let the
condensation disappear on its own before
turning the unit on again.
s"EFOREMOVINGTHEUNITMAKESURETHEDISC
tray is empty.
s7HERETHEMAINSPLUGORANAPPLIANCECOUPLER
is used as a disconnect device, the disconnect
device shall remain readily operable.
s/THERIMPORTANTUSEANDCLEANINGINFORMATION
at the end of the booklet.
To Next Page
Loading...
Need help?
General
