Redarc BMS1230S2 User Manual

34
3 USER GUIDE
3.8 Factory Settings
The Manager30 is shipped with a number of settings already programmed into
the unit. These settings are set to ensure that the charger will safely charge any
battery and may not refl ect the actual requirements for your battery type. It is
important to review these settings and adjust as required.
Setting Factory Value
Battery Type GEL
Capacity 40AH
Charge Mode TOURING
Temperature Scale Celsius
Key Tone Status ON
Contrast 50%
Brightness 90%
Backlight Timer 30 secs
Home Screen Timer 30 secs
Time/Date Format 12 Hour/DD/MM/YYYY
Language English
Max Charge Current 30 Amps
Low SOC Alarm 10%
Low Voltage Alarm 10.5 Volts
Load Disconnect Off
DC Input Trigger Auto
Modifi cation of the ‘Advanced Settings’ menu items affect the way The Manager30 unit responds to charging situations.
Modifi cation of these settings may result in the unit not functioning at 100% of its capacity. These settings should only
be modifi ed if absolutely necessary and when the effects of the changes are 100% understood.

Redarc BMS1230S2 Specifications

General

Brand	Redarc
Model	BMS1230S2
Category	Camera Accessories
Language	English