Reolink RLC-510A User Manual

Reolink PoE Camera
User Manual
58
Add or Delete a Camera
Add the camera in LAN
1. If you want to add the camera in LAN, we recommend that you enable the Add
Devices Automatically option. Once your smart phone and camera are connected
to the same network, the Reolink App can find the Reolink device automatically in
LAN.
2. Tap and go to Settings > Add Devices Automatically.
Or you can go to the home page and tap > LAN and select the camera you
want to add.

Reolink RLC-510A Specifications

General

Form factor	Bullet
Weatherproof	Yes
Mounting type	Ceiling/wall
Product color	White
Housing material	Aluminum
International Protection (IP) code	IP66
Sensor type	CMOS
Number of sensors	-
Optical sensor size	1/2.7 \
Type	IP security camera
Placement supported	Indoor & outdoor
Connectivity technology	Wired
Number of lenses	1
LED type	IR
Infra-red wavelength	850 nm
Night vision distance	30 m
Number of illumination LEDs	18
Total megapixels	5 MP
Maximum resolution	2560 x 1920 pixels
Video formats supported	H.264
Minimum illumination	- lx
DC output current	1 A
DC output voltage	12
Power source type	DC, PoE
Power consumption (typical)	12 W
Wi-Fi	No
Number of users	20 user(s)
Networking standards	IEEE 802.3af
Ethernet interface type	10 Gigabit Ethernet, 100 Gigabit Ethernet
Supported network protocols	HTTPS, SSL, TCP/IP, UDP, HTTP, IPv4, UPnP, RTSP, RTMP, SMTP, NTP, DHCP, DNS, DDNS, FTP, P2P
Compatible memory cards	MicroSD (TransFlash)
Maximum memory card size	256 GB
Operating temperature (T-T)	-10 - 55 °C
Operating relative humidity (H-H)	10 - 90 %
Mobile operating systems supported	Android, iOS

Weight and Dimensions

Depth	186 mm
Height	67 mm
Weight	425 g