EasyManuals Logo
Home>Reolink>Digital Camera>RLC-510A

Reolink RLC-510A User Manual

Reolink RLC-510A
89 pages
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #89 background imageLoading...
Page #89 background image
Reolink PoE Camera
User Manual
88
If you added more than 3 cameras on one PoE switch and connect the switch to
the PoE port on the NVR, the video stream may be delayed or frozen.
Troubleshooting
Camera Is Not Powered up
If your camera is not powered up, please try the following solutions:
1. Please change another working adapter/working cable/working port to
connect the camera.
2. Please refer to this user manual to reset the camera.
3. Then please cover the day/night sensor or place the camera in a dark
environment to check if the IR lights are on.
Camera does not work with the third-party software
Reolink IP cameras (battery-powered models not included) are ONVIF2.1 compliant,
which means they can be added to some third-party surveillance software for
monitoring and recording. For the surveillance software you mentioned, sorry that
we’re not able to assure you that it will be fully compatible with Reolink cameras as
we didn’t test it or made any adaptations. Those we have tested and guarantee
compatibility can be seen at https://reolink.com/3rd-party-compatibility/.
Fail to upgrade the firmware
If you fail to upgrade the firmware for your camera, here are some steps for your
confirmation:
1.Check what is the firmware version of your camera, and what is the firmware
version you want to upgrade. The camera model and hardware number should
match, this way to make sure you upload the correct firmware.
2.Ensure to unzip the downloaded zip file and check the format of the file a pak.
file.
3.Re-download the firmware to try upgrade again.
4.Reset the camera to factory settings then try upgrade the firmware again.

Other manuals for Reolink RLC-510A

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Reolink RLC-510A and is the answer not in the manual?

Reolink RLC-510A Specifications

General IconGeneral
Form factorBullet
WeatherproofYes
Mounting typeCeiling/wall
Product colorWhite
Housing materialAluminum
International Protection (IP) codeIP66
Sensor typeCMOS
Number of sensors-
Optical sensor size1/2.7 \
TypeIP security camera
Placement supportedIndoor & outdoor
Connectivity technologyWired
Number of lenses1
LED typeIR
Infra-red wavelength850 nm
Night vision distance30 m
Number of illumination LEDs18
Total megapixels5 MP
Maximum resolution2560 x 1920 pixels
Video formats supportedH.264
Minimum illumination- lx
DC output current1 A
DC output voltage12
Power source typeDC, PoE
Power consumption (typical)12 W
Wi-FiNo
Number of users20 user(s)
Networking standardsIEEE 802.3af
Ethernet interface type10 Gigabit Ethernet, 100 Gigabit Ethernet
Supported network protocolsHTTPS, SSL, TCP/IP, UDP, HTTP, IPv4, UPnP, RTSP, RTMP, SMTP, NTP, DHCP, DNS, DDNS, FTP, P2P
Compatible memory cardsMicroSD (TransFlash)
Maximum memory card size256 GB
Operating temperature (T-T)-10 - 55 °C
Operating relative humidity (H-H)10 - 90 %
Mobile operating systems supportedAndroid, iOS
Weight and Dimensions IconWeight and Dimensions
Depth186 mm
Height67 mm
Weight425 g

Related product manuals