M219 Additional room amplifier
M Series
2
M219
Additional room
amplifier
General
The M219 is a digital Additional
Room Amplifier from the newest
M Series in the
REVOX Multiroom
programme. It is used for the
reproduction of music in the
additional rooms in a Multiroom
system and can also supply the
listener with current information
through an additional display.
The M219 receives the signals
from a selected source (CD,
Tuner, Server ...) in the main
room through a multiroom bus
cable. Volume, balance, bass
and treble settings can be made
in individually in each room.
Also, up to 3 local sources can
be connected and listened to in
each additional room. If you
want “concealed” operation,
various wall-mounted
controllers or IR receivers can
be connected.
Installation
The M219 should be installed in
such a way that the ventilation
slots are not covered up and so
that there is a gap of at least 5
cm ( ≈ 2 in) between the unit
and any walls or furniture.
You should avoid installing it in
locations where:
- there is direct sunlight
- it is next to a heat source
- there is poor ventilation
- there is a lot of dust in the
atmosphere
- it is unstable
- there is a risk of splashing
- there is high humidity
Furthermore you may not place
objects filled with liquids, such
as vases, or naked flame
sources, such as lighted
candles, on the M219.
Stacking several M219s
If you want to stack several
M219s on top of each other, we
recommend that you use the
corresponding installation kit,
with the Part no. 1.551.313.00.
Room-Amplifier
M219
Room-AmplifierM219
Room-AmplifierM219
To Next Page
Loading...
Need help?
General
