Page 26 of 93
Copyright (c) 2012 RICOH COMPANY, LTD. All rights reserved.
1.5 Glossary
1.5.1 Glossary for This ST
For clear understanding of this ST, Table 10 provides the definitions of specific terms.
Table 10 : Specific Terms Related to This ST
Terms Definitions
MFP Control Software A software component installed in the TOE. This component is stored in
FlashROM and SD Card. The components that identify the TOE include
System/Copy, Network Support, Scanner, Printer, Fax, RemoteFax, Web
Support, Web Uapl, NetworkDocBox, animation, PCL, PCL Font, LANG0,
LANG1 and Data Erase Onb.
FCU Control Software A software component installed in the TOE. This component is stored in the
FCU. Among the software components by which the TOE is identified,
GWFCU3.5-2(WW) is this.
Login user name An identifier assigned to each normal user, MFP administrator, and supervisor.
The TOE identifies users by this identifier.
Login password A password associated with each login user name.
Lockout A type of behaviour to deny login of particular users.
Auto logout A function for automatic user logout if no access is attempted from the
Operation Panel or Web Function before the predetermined auto logout time
elapses.
Auto logout time for the Operation Panel:
Time specified by the MFP administrator within 60 to 999 seconds.
Auto logout time for the Web Function:
30 minutes (this cannot be changed by users). This auto logout time is also
referred to as "fixed auto logout time".
Minimum Character No. The minimum number of registrable password digits.
Password Complexity
Setting
The minimum combination of the characters and symbols that can be used as
registrable passwords.
There are four types of characters: uppercase and lower case alphabets, digits
and symbols.
There are Level 1 and Level 2 Password Complexity Settings. Level 1 requires a
password to be a combination of two or more types of characters and symbols
specified above. Level 2 requires a password to be a combination of three or
more types of characters and symbols specified above.
Basic Authentication One of the procedures for identification and authentication of TOE users who
are authorised to use the TOE. The TOE authenticates TOE users by using the
login user names and the login passwords registered on the TOE.
To Next Page
Loading...
Need help?
General
