Installing the Small Size Paper Tray
This section describes how to install the small size paper tray.
To use the small size paper tray, install it in tray 2 or the lower paper trays. In the following example
procedure, the small size paper tray is installed in tray 2.
• The small size paper tray cannot detect paper size automatically. Specify the paper size on the control
panel. For details, see “Changing to a Size That Is Not Automatically Detected”.
For users of type 1 and 2
The small size paper tray cannot be installed in the lower paper tray.
1. Check the contents of the package.
1. Small size paper tray
2. Remove the packaging from the small size paper tray.
3. Carefully pull out tray 2 until it stops, then slightly raise the front of the tray, and then pull
it out completely.
To Next Page
Loading...
Need help?
General
