Technical Bulletin PAGE: 1/1
Reissued: 06-Jan-11
Model: Al-P1 Date: 13-Mar-08 No.: RG179005e
RTB Reissue
The items in bold italics have been added.
Subject: Firmware Release Note: Engine Prepared by: T.Hirakawa
From: 1st Overseas Tech Support Sec., 1st PQM Dept.
Classification:
Troubleshooting
Mechanical
Paper path
Part information
Electrical
Transmit/receive
Action required
Service manual revision
Retrofit information
Other ( )
This RTB has been issued to announce the firmware release information for the Engine.
Version Program No. Effective Date Availability of RFU
1.06:01 G1795160G January 2011 production Available
1.05:01 G1795160F March 2010 production Available
1.04:01 G1795160E October 2008 production Available
1.03:01 G1795160D August 2008 production Available
1.02:01 G1795160C April 2008 production Available
1.01:01 G1795160B February 2008 production Available
1.00:01 G1795160A 1st Mass production Available
Note: Definition of Availability of RFU
“Available”: The firmware can be updated via RFU or SD card.
“Not available”: The firmware can only be updated via SD card.
Version Modified Points or Symptom Corrected
1.06:01 Other changes
1. Improve the reliability of detection of opening-closing timing of the bridge
unit door.
2. Improve the reliability of continuous action among printing jobs while
multiple continuous printing with the staple function selected.
1.05:01 Minor bug correction
1.04:01 The print speed decreases under the following conditions:
- A duplex job is performed using "limitless paper feed", and
- The machine switches over to another tray after running out of paper
1.03:01 Minor changes applied to improve reliability
1.02:01 1. The cleaning web sometimes reaches its End condition before the 160K PM
target.
When both of the following conditions occur, the possibility of occurrence
increases:
- The more jobs are performed per day, AND
- The more times the machine enters Off Mode per day.
1.01:01 Minor changes applied to improve reliability
1.00:01 1st Mass production