Charging the Battery
The rechargeable battery supplied with the camera is not
charged at shipment. Charge the battery in the supplied
BJ-6 battery charger before use.
1
Place the battery in the charger.
Place the battery label up
with the “+” and “–” labels ori-
ented to match the labels on
the charger.
Caution
Be sure the battery is in the correct
orientation.
2
Plug the charger in.
The charger lamp will light
while the battery charges.
An exhausted battery will re-
charge in about two hours at
25 °C.
Note
If the charger lamp blinks, a battery or charger fault may have
occurred. Unplug the charger and remove the battery.
3
Remove the battery.
Charging is complete when the charger lamp turns
off. Unplug the charger and remove the battery.