Ricoh MP C6502 Series User Manual

Loading Paper into the Wide Large Capacity
Tray
• Check that the paper edges are aligned with the left side.
1. Check that paper in the paper tray is not being used, and then pull the tray carefully out
until it stops.
CVA026
2. Load paper into the paper tray with print side up.
Do not stack paper over the limit mark.
CVA027
3. Carefully push the paper tray fully in.
• If you select Thick Paper 2 to 4, [Coated Paper], [Label Paper], or [OHP (Transparency)] in [Tray
Paper Settings], air is blown out automatically to fan the paper loaded in the wide LCT. Fan this
paper before loading it. For details, see page 121 "Fanning the Paper".
• Various sizes of paper can be loaded in the wide LCT by adjusting the positions of side fences and
end fence. For details, see "Changing the Paper Size in the Wide Large Capacity Tray", Paper
Specifications and Adding Paper .
Loading Paper into the Wide Large Capacity Tray
137

Ricoh MP C6502 Series Specifications

General

Brand	Ricoh
Model	MP C6502 Series
Category	All in One Printer
Language	English