Ricoh SP 200 User Manual

1. Interface Settings
You can change the interface setting.
2. IPv4
You can change the IPv4.
3. IPv6
You can change the IPv6.
4. SNMP
You can change the SNMP.
5. Administrator Settings
You can change the administrator password.
6. Restore Defaults
You can reset the administrator password and other network settings.
7. Machine Information
The machine information appears.
Changing the Machine Settings
To change the machine settings, log in to the machine as the administrator.
1. Launch the Web browser.
2. In the address bar, enter "http://(machine's IP address)/".
4. Configuring the Machine Using Utilities
38

Ricoh SP 200 Specifications

General

Brand	Ricoh
Model	SP 200
Category	Printer
Language	English