RICOH SP C250DN/SP C252DN Color Laser Printers
Getting Started Guide
18
3.2 Network Printer Driver Install
If you have a network connection from the printer to a network hub, using a wired (Ethernet) or wireless
connection, you must install the printer driver software from the supplied CD. If you do not have the CD, the
software can be downloaded from the Ricoh website (www.ricoh-usa.com). Also see
Appendix C: Printer
Driver Download.
Note:
• The following components can be installed:
− PCL 6 Printer Driver
− PCL 5c Printer Driver
− PostScript 3 Printer Driver
• Close all applications currently running, and ensure that no documents are in the print queue.
• The procedures in this section are based on Windows 7. The actual procedures may vary depending on
the computer operating system in use.
To install the printer driver, proceed as follows:
1. Wired Connection
: Confirm that the network cable is plugged into the printer’s Ethernet port, and turn
printer power switch On.
Wireless Connection: Network cable is not required. However, confirm that the printer power switch is
On, and that you have made a successful connection between the printer and Wi-Fi router.
2. Insert the supplied Printer Drivers and Utilities CD into the CD-ROM
drive.
3. Click [Run SETUP.EXE].
Note: The installer launches automatically. If not, double-click
SETUP.EXE from the CD’s root directory.
4. If User Account Control message displays, click [Yes].
5. If necessary, select language, and click [OK].