Problem Solutions
Black gradation is not natural. • Select [CMY + K] for [Gray Reproduction:] in the printer
driver's dialog box.
For details, see the printer driver's Help.
A color is missing or partially
blurred.
• Paper is damp. Use paper that has been stored properly.
For details, see page 40 "Paper Precautions".
• A print cartridge is almost empty. When the "Toner is almost
empty." message appears on the display panel. If the toner
indicator on the initial screen seems empty, replace the print
cartridge of the displayed color.
For details, see "Replacing the Print Cartridge", Operating
Instructions.
• Condensation may have collected. If there were sudden
changes in temperature or humidity, restart the printer when it
is acclimatized.
When Printer Is Not Functioning Properly
Problem Solutions
Paper is not fed from the
selected tray.
When you are using a Windows operating system, the printer
driver settings override those set using the control panel. Set the
input tray you want using the printer driver.
For details, see the printer driver's Help.
Prints do not stack properly. • Paper is damp. Use paper that has been stored properly. See
page 40 "Paper Precautions".
• If printed sheets come out curled, use the standard tray
extension. See page 10 "Guide to Components".
It takes too long to turn on the
printer.
If the printer is turned off while accessing the hard disk (for
example: during file deletion), the printer will require more time to
power-up the next time it is turned on. To avoid this time delay, do
not turn the printer off while it is in operation.
Other Printing Problems
111
To Next Page
Loading...
Need help?
General
Weight and Dimensions
