Ricoh THETA Z1 User Manual

RICOH THETA SC2 - User Guide
update_01.pdf[2019/11/12 16:08:39]
Top
>
Updating the Camera
Firmware
>
Updating the Camera
Firmware Using a Computer
Updating the Camera Firmware Using a Computer
The camera firmware can be updated using the basic app for computer.
The app is required to update the firmware. Download the app from the following site.
https://support.theta360.com/en/download/
1. Start the basic app for computer.
2. Select [File] → [Firmware Update] in the menu.
3. Follow the instructions on the screen to connect the camera to the computer using the provided USB cable.
4. Select [To next].
5. Check the current version and available version, and select [To next].
The firmware file transfer starts.
6. When “Transfer Done” is displayed, follow the instructions on the screen to update the firmware on the
device.
Caution
Fully insert the USB cable when connecting it.
Do not disconnect the camera from the computer during the firmware file transfer.
and flash alternately on the OLED panel of the camera during the firmware update.
← Back
▲ Back to Top
© 2019 Ricoh Company, Ltd. All Rights Reserved.
Note

Ricoh THETA Z1 Specifications

General

Storage media	Internal memory
Wi-Fi	Yes
Product color	Black
ISO sensitivity	80, 6400
Camera interface	USB Type-C
Total megapixels	23 MP
Protection features	Bump resistant
Works with Amazon Alexa	No
Field of view (FOV) angle	360 °
Fastest camera shutter speed	1/25000 s
Maximum frame rate	97 fps
Number of microphones	1
Maximum video resolution	3840 x 1920 pixels
Image formats supported	JPEG, RAW
Maximum image resolution	7296 x 3648 pixels
Still image resolution(s)	RAW:7296×3648 pixels JPEG:6720×3360 pixels
Power source	Battery
Package type	Box

Weight and Dimensions

Depth	29.7 mm
Width	48.2 mm
Height	132.5 mm
Weight	182 g