More than 0.5m (1.6ft)
More than 0.5m (1.6ft)
More than 1.5m (4.9ft)
Installation
Using the robot
1. Place the Charging Dock against the wall on a flat
surface and plug it into mains power.
Dock Location Beacon
Notes:
• Ensure that a distance of at least 0.5m on both sides and 1.5m in front is
retained around the Charging Dock.
• The Power Cable, when vertical to the floor, may get caught by the robot,
disconnecting the Charging Dock.
• The Power Indicator is on when the Charging Dock is connected to mains
power, and off when the robot is charging.
• For a better app user experience, place the Charging Dock in an area with a
strong WiFi signal.
• To avoid problems returning to the dock, do not place the Charging Dock in
direct sunlight or block the Dock Location Beacon
• Do not place the Charging Dock in passageways or doorways. This may
prevent access due to the safe zone around the dock.
Using the robot
2. Secure the moisture-proof mat.
After securing the charging dock, wipe the area where the
moisture-proof mat will be placed with a dry cloth as
shown. Stick the double-sided tape first to the
moisture-proof mat then in position on the floor.
Note:
Always use the moisture-proof when placing the charging dock on a wooden
floor.
09
To Next Page
Loading...
Need help?
General
