16
Sample Settings
* For information on how to set the delay time, refer to “DELAY/LOOPER” (p. 6)
Extreme
[SELECT] switch=LEAD
CUBE-40XL CUBE-80XL
[SELECT] switch=LEAD
This is an extreme sound with intense distortion.
This is a high-gain sound that packs a lot of punch in the low end, while delivering a great deal of edge in the upper range.
You can obtain variations in the sound by moving the [MIDDLE] knob.
If you turn on HEAVY OCTAVE, you can achieve an even greater sense of distortion in the low end.
Space Clean
Delay time = approx. 250 ms (reference)
[SELECT] switch=JC CLEAN
CUBE-40XL CUBE-80XL
Delay time = approx. 250 ms (reference)
[BRIGHT] switch=OFF
[SELECT] switch=JC CLEAN
This is a transparent sound that uses spatial eects.
Use the JC CLEAN amp, which is modeled on the Roland JC-120, and add chorus, long delay, and reverb.
Using this setting with a guitar that has single-coil pickups makes for arpeggios and chord strumming with beautiful resonance. If you’re using a guitar
with humbucker pickups on CUBE-80XL, turn the [BRIGHT] switch to ON to achieve a bright, open sound.
Setting the delay time to a value that makes the delay sound heard slightly ahead of the tempo of the phrase played produces a thicker sound.
Surf Line
[SELECT] switch=LEAD
CUBE-40XL CUBE-80XL
[SELECT] switch=LEAD
This sound is perfect for the surf music popular in the 1960s.
Using this setting with a guitar that has single-coil pickups makes for an edgy sound.
Applying deep spring reverb and using muting picking and chromatic runs (muted picking with glissandos) produces the classic surf sound.
To Next Page
Loading...
Need help?
General