Roland EM-2000 User Manual

EM-2000
Oct, 1998
TEST MODE
Main Test Menu
After loading the Test Program, turn the instrument on.
The Main Test Menù will be displayed, which is divided into two major groups: MUSIC STYLE and TONE.
To exit the Test Mode, turn the instrument off.
1. SWITCH test
Press the Music Style 1 button.
The display shows:
Action
: every button, when pressed, will generate a sound. The LCD will consequently show the button name
on the top of the left side as well as its ON/OFF status. On the bottom of the left side the name of the following
button to be pressed will be shown. Every time a button has been checked, the asterisks disappear from the
display.
Once all buttons have been subsequently pressed, you will automatically exit the Switch Test and get back to
the Main Menù.
If you want to stop and exit the Switch Test, you can do it by pressing the “Tone 8” and “F5” buttons.
EM-2000 SWITCH TEST
Nome XXXXX
O N /OFF
*****************************************
*****************************************
******************
Next. XXXXX
Press Tone 8 and F5 to exit
EM-2000 test Ver. x . x x
Style Tone
1 Switch 1 Flash
2 Encoder 2 Scsi
3 Adc 3 Rom Style
4 Lcd 4 Midi
5 Led 5 FDD
6 Keyscan 6 Audio Test
7 Ram
2. ENCODER check
Press the “music style 2” button
The display shows:
To exit, press F5.
3. ADC Check
Press the “music style 3” button.
The display shows:
** =
When passing your hand over the DBeam controller, the value appears on LCD.
Raise or lower your hand. Check that the value changes 0 from 127.
To exit, press F5.
4. LCD Check
Press the “music style 4” button.
The display shows:
Action:
If you press the “F1” button, the display will be blue
If you press the “F2” button, the display will be white;
If you press the “F3” button, the display will show the numbers from ‘0’ to ‘9’;
To exit, press F5.
EM-2000 LCD TEST
Press F1 blue Test
Press F2 white Test
Press F3 normal Test
Press F5 to exit
EM-2000 ADC TEST
Foot switch= (On /Off) Sust Foot switch = (On/Off )
Balance = (0 +/- 127) After touch = (0-127)
D.Beam C. = (0 - 127) ** Modulation = (0 - 127)
Express = (0 - 127)
Bender = (0 +/- 127)
Press F5 to exit
EM-2000 TEST ENCODER
Drums Part _ _> 0 - 255 Lower Num_ _> 0 - 255
Accomp Gr _ _> 0 - 255 Upper _Var _ _> 0 - 255
Bass Bank _ _> 0 - 255 Tempo _ _> 0 - 255
Press F5 to exit
31

Roland EM-2000 Specifications

General

Brand	Roland
Model	EM-2000
Category	Electronic Keyboard
Language	English