Roland EM-50 User Manual

2.2.Rear panel
EM-50/30
CD MIDI OUT/IN connectors
Connect the MIDI OUT jack to the MIDI IN jack of
your computer (or sound card) to transfer MIDI data
from the EM-50/30 to the computer. Connect the
MIDI IN jack of the EM-50/30 to the computer's
MIDI OUT jack to receive data from the computer.
Note: Use the supplied MIDI/Joystick cable for connecting
the EM-50/30 to the sound card of your computer. For oth-
er MIDI applications, you nced regular MIDI cables.
(2) SUSTAIN jack
'This is where you can connect an optional DP-2, DP-
6, or BOSS FS-5U footswitch that allows you to hold
(“sustain”) the notes you play with your right hand.
(3) INPUT jacks/LEVEL control
These jacks allow you to connect the outputs of your
CD player, cassette deck, or the audio outputs of
another instrument (sound module, synthesizer, etc.).
Use the LEVEL control for setting the volume of this
external signal source.
(4) OUTPUT jacks
Connect these jacks to the inputs of your HiFi or a
keyboard amplifier if you think the EM-50/30's inter-
nal amplification system is not powerful enough. If
your amplifier is mono, be sure to only use the
L/MONO jack.
You can also connect these jacks to the inputs of your
cassette deck, MD recorder, etc. for making audio
recordings of your music.
(5) DC IN jack
This is where you need to connect the supplied ACJ
adapter.
Note: Be sure to only use the ACJ adapter supplied with
your EM-50/30. Other adapters may damage your Cre-
ative Keyboard.
11
m
=
(e)
=
w
x=

Roland EM-50 Specifications

General

Brand	Roland
Model	EM-50
Category	Electronic Keyboard
Language	English