90
Indication Meaning
Error: 1 The music le you attempted to save is read-only. It cannot be saved.
Error: 2
An error occurred while writing. It may be that the protect tab of the external media is in the “Protect (write prohibit)”
position, or that the external media has not been formatted.
Error: 10 External media is not inserted. Insert external media, and try the operation once again.
Error: 11
There is insucient free space at the save destination. Either insert other external media, or delete unwanted data
(song data, registration sets) and try the operation again.
Error: 14
An error occurred while reading. It may be that the external media is damaged. Insert other external media and try the
operation again. Alternatively, format the external media.
Error: 15 The le could not be read. This data format is not supported by the FP-7F.
Error: 16
The data could not be read fast enough during song playback. In some cases you may be able to play back if you wait
several seconds and then press the SONG [PLAY/STOP] button once again.
Error: 18 This audio format is not supported. Please use WAV format 44.1 kHz 16-bit linear audio les.
Error: 30 The FP-7F has insucient storage space.
Error: 40
Too much MIDI data was transmitted by an external MIDI device all at once, and the FP-7F was unable to process it.
Reduce the amount of data being transmitted by the external MIDI device.
Error: 41 A MIDI cable was disconnected. Connect the MIDI cable correctly.
Error: 43 An error occurred during MIDI communication. Check the MIDI cable and the connected MIDI device.
Error: 51
The system may have malfunctioned. Try the operation again. If this indication still appears after trying the operation
several times, contact Roland Service Center.
Error: 65
Excessive current ow occurred in the external memory connector. Verify that there is no malfunction in the external
media, and then turn the power o, then on again.
* External media: USB memory, CD-ROM, etc.
Error Messages
To Next Page
Loading...
Need help?
General
