Roland GR-20 User Manual

22
Chapter 3 Editing The Sounds
Selecting the Type of Glide
Effect—GLIDE TYPE
You can select how the pitch changes when you press the
GLIDE pedal.
1. Press the [GLIDE TYPE] button.
fig.3-03(GLIDE TYPE)
2. Use the [NUMBER/VALUE] knob to change the setting.
3. Press the [GLIDE TYPE] button or [EXIT] button to
return to Play mode.
* If you want to keep your edited sound, execute Write (p. 24) to
write your settings into a USER patch.
u1: GLIDE UP 1
d1: GLIDE DOWN 1
The pitch will change one semitone (up/
down) when you press the GLIDE pedal,
and will return to normal when you re-
lease the pedal.
u2: GLIDE UP 2
d2: GLIDE DOWN 2
The pitch will change a whole step (up/
down) when you press the GLIDE pedal,
and will return to normal when you re-
lease the pedal.
u3: GLIDE UP 3
d3: GLIDE DOWN 3
The pitch will change a perfect fourth
(up/down) when you press the GLIDE
pedal, and will return to normal when you
release the pedal.
u4: GLIDE UP 4
d4: GLIDE DOWN 4
The pitch will change a perfect fifth (up/
down) when you press the GLIDE pedal,
and will return to normal when you re-
lease the pedal.
u5–u8: GLIDE UP 5–8
d5–d8: GLIDE DOWN 5–8
The pitch will change one octave (up/
down) when you press the GLIDE pedal,
and will return to normal when you re-
lease the pedal. Higher settings will short-
en the time over which the pitch changes.
V1–V4: VIBRATO 1–4
Pressing the pedal applies vibrato (an ef-
fect that changes the pitch cyclically). The
effect quickens as the value is increased
GR-20_e.book 22 ページ ２００７年７月２日 月曜日 午後１２時５３分

Roland GR-20 Specifications

General

Brand	Roland
Model	GR-20
Category	Synthesizer
Language	English