Roland GR-20 User Manual

42
Chapter 6 Appendices
● Pitch Bend Change
STATUS
SECOND THIRD
EnH llH mmH
n=MIDI Channel Number: 0H - FH (ch.1 - ch.16)
mm,ll=Value: 00H, 00H - 7FH, 7FH (-8192 - +8191)
■ Channel Mode Message
● All Note Off
STATUS SECOND THIRD
BnH 7BH 00H
n=MIDI Channel Number: 0H - BH (ch.1 - ch.12)
* Can be received only through the Basic channel
* Turn off all notes that are now on.
● OMNI OFF
STATUS
SECOND THIRD
BnH 7CH 00H
n=MIDI Channel Number: 0H - BH (ch.1 - ch.12)
* Can be received only through the Basic channel.
* Will act the same as All Note Off.
● OMNI ON
STATUS SECOND THIRD
BnH 7DH 00H
n=MIDI Channel Number: 0H - BH (ch.1 - ch.12)
* Can be received only through the Basic channel.
* Will act the same as All Note Off.
● MONO
STATUS SECOND THIRD
BnH 7EH mmH
n=MIDI Channel Number: 0H - BH (ch.1 - ch.12)
mm=Number of Individual Channels: 00H - 10H (0 - 16)
* Can be received only through the Basic channel.
* Will act the same as All Note Off.
● POLY
STATUS SECOND THIRD
BnH 7FH 00H
n=MIDI Channel Number: 0H - BH (ch.1 - ch.12)
* Can be received only through the Basic channel.
* Will act the same as All Note Off.
■ System Realtime Message
● Active Sensing
STATUS
FEH
* Having received this message, the GR-20 expects to receive information of any status of
data during about 420msec.If the GR-20 doesn’t receive any message during that time, it
acts as if the All Note Off message is received, and returns to normal operation (will not
check interval of messages).
■ System Exclusive Message
STATUS SECOND THIRD
F0H iiH ddH eeH F7H
F0H: System Exclusive
ii = Manufacturer ID: 41H (65)
dd ......ee = Data: 00H - 7FH (0 - 127)
F7H: EOX (End Of Exclusive)
* For more details, refer to the page of “Roland Exclusive message” and Section 3 or after.
2. Transmitted Data
■ Channel voice messages
● Note Off
STATUS
SECOND THIRD
9nH kkH 00H
n=MIDI channel Number: 0H - FH (ch.1 - ch.16)
kk=Note Number: 00H - 7FH (0 - 127)
● Note On
STATUS
SECOND THIRD
9nH kkH vvH
n=MIDI Channel Number: 0H - FH (ch.1 - ch.16)
kk=Note Number: 00H - 7FH (0 - 127)
vv=Velocity: 01H - 7FH (1 - 127)
● Control Change
❍ Bank Select
STATUS
SECOND THIRD
BnH 00H mmH
BnH 20H llH
n=MIDI Channel Number: 0H - FH (ch.1 - ch.16)
mm,ll=Bank Number: 00H, 00H - 0AH, 00H
❍ Foot Type
STATUS
SECOND THIRD
BnH 04H vvH
n=MIDI Channel Number: 0H - BH (ch.1 - ch.12)
vv=Control Value: 00H - 7FH (0 - 127)
* When the Expression pedal is operated with EXP TYPE = “FL”, “EF”, the GR-20 sends
this as the operation.
❍ Data Entry
STATUS
SECOND THIRD
BnH 06H mmH
BnH 26H llH
n=MIDI Channel Number: 0H - FH (ch.1 - ch.16)
mm,ll=the value of the parameter specified by RPN
❍ Volume
STATUS
SECOND THIRD
BnH 07H vvH
n=MIDI Channel Number: 0H - FH (ch.1 - ch.16)
vv=Volume: 00H - 7FH (0 - 127)
* Transmitted the total volume fixed with expression pedal and GK PU operation.
GR-20_e.book 42 ページ ２００７年７月２日 月曜日 午後１２時５３分

Roland GR-20 Specifications

General

Brand	Roland
Model	GR-20
Category	Synthesizer
Language	English