50
Apr. 2006 JUNO-G/JUNO-G (J)
Error Messages
If an incorrect operation is performed, or if processing could not be performed as you specified, an error message will appear. Refer to the explanation for the error
message that appears, and take the appropriate action.
Message Meaning Action
Cannot Edit Preset
Sample!
This is a preset sample, and therefore cannot be edited. -
Card Not Ready! A memory card is not inserted in the slot. Insert a memory card into the slot.
Data not found The data for placement is not specified. -
Empty Sample! The sample contains no data. Select a sample that contains data.
Empty Song! The song has not been recorded, and therefore cannot be played. Select a song that contains data.
File Name Duplicate A file with the same name already exists. Delete the file bearing the same name from the disk, and if overwrit-
ing and saving the data, merely save the file. If you do not want to
delete the file with the same name from the disk, either save the file
with a different name.
Illegal File! The JUNO-G cannot use this file. -
Memory Damaged! The contents of memory may have been damaged. Please perform the Factory Reset operation. If this does not resolve
the problem, please contact your dealer or the nearest Roland Ser-
vice Center.
Memory Full! Saving is not possible because there is insufficient space in the
user area or memory card.
Delete unneeded data.
MIDI Offline! There is a problem with the MIDI cable connection. Check that the MIDI cable has not been disconnected or broken.
Movable onto Bar
Line Only
The beat change event can be put only on bar line (beginning of a
measure).
-
No More Note Num-
bers!
A maximum of 16 different note numbers can be used in one style
of the arpeggio/rhythm function.
Please delete unneeded notes.
No More Sample
Numbers!
The sample cannot be divided any further. Erase unneeded samples in order to allocate 256 or more consecutive
sample numbers.
Since fewer than 256 consecutive sample numbers are vacant, no
further sampling is possible.
No More Song Num-
bers!
No more songs can be saved. A maximum of 256 songs can be
handled simultaneously for both the user bank and card bank.
Please delete unneeded songs.
Now Playing! Since the JUNO-G is playing, this operation cannot be executed. Stop playback before you execute the operation.
Permission Denied! The file is protected. -
Playback Tempo
Range Over
Tempo values exceed the allowable limit, and data is created in
which the closest time available within the allowable range is
specified.
-
Power off and check
DIMM
Turn off the power immediately, and re-insert the DIMM memory
correctly.
-
Recording Parameter
Error
You are attempting to begin recording after a looped segment. You are attempting to begin recording within or before a looped seg-
ment.
Rec Over Flow Since a large amount of recorded data was input all at once, it
could not be processed correctly.
Reduce the amount of recorded data.
Sample Length Too
Short!
The sample is too short, and cannot be edited correctly. If the sample is extremely short, editing may not produce the desired
result.
Sample Memory Full! Since there is insufficient sample memory, no further sampling or
sample editing is possible.
Erase unneeded samples.
Song Format Error This song is damaged. This song cannot be used.
Song Full Since the maximum number of notes that can be recorded in a
song has been exceeded, no further recording/editing is possible.
Use the track edit Delete or Erase commands to remove unneeded
data from the song that you are recording/editing.
Song Not Found The selected song cannot be found. -
Too Many Sample Se-
lected!
The operation cannot be executed, since marks are assigned to
more than one sample.
Either clear the marks, or mark only one sample.
Unformatted! The memory card is in an unsupported format. Format the memory card.
You Cannot Copy
This Message
This message cannot be copied. -
You Cannot Erase
This Message
This message cannot be erased. -
You Cannot Move
This Message
This message cannot be moved. -
To Next Page
Loading...
Need help?
General
