50
Editing Using Only the JV-1010
■ Tuning (Master Tune)
Allows the sound generator to be tuned. The value indicated is the
frequency of Note Number 69 (the A4 key).
fig.1-36
1
Press the VALUE knob to switch to a mode other than the
Patch mode (PATCH), that is, to the PERFORM, RHYTHM, or
GM mode.
2
While holding down the VOLUME knob, press the VALUE
knob.
Switch to the Edit mode.
3
Turn the CATEGORY/BANK knob to choose ETHNIC
(Master Tune).
4
Turn the VALUE knob to adjust the tuning frequency.
The value 27.4–52.6 is indicated in the display.
5
While holding down the VOLUME knob, press the VALUE
knob.
The JV-1010 exits Edit mode.
32,5 1,4
When in the Patch mode,
you can’t enter the Edit
mode.
The hundreds place (4) is
not displayed.
For more detailed
information, refer to the
Reference Manual that is
on the included CD-ROM.
To Next Page
Loading...
Need help?
General
