Roland R-8M User Manual

©HOW TO PLAY THE SOUNDS
Use
VALUE
fAlfy]
to select an internal Patch
(1-01—1-32),
and play the sounds.
When using Patches from a RAM card, insert the RAM card firmly into the RAM card slot. Use the
CURSOR [^Eto
move to "I" (internal), and use VALUE[A][y]to change this to
"C"
(card).
* Newly purchased RAM cards cannot be used as they are. When using a RAM card with
the R
-
8M for the first tinne, refer to "Using a RAM Card"
(
<^
page
60).
* Patches can also be selected by
incoming
program change messages.
Program
numbers
are user assignable
(c^see page
57).
Play
the instruments of a sound ROM
card
A ROM
card (SN-R8 series) can increase the
available
number of instruments. Up
to three
cards can
be used at once.
Internal instruments and card instruments can be freely combined to create a Patch.
How to select instruments
To select instruments from a
sound
ROM
card, use the following procedure.
CD
Make sure
that the sound ROM card is inserted correctly and firmly into one of the PCM
CARD slots.
Card number
-
^
The card may be inserted into any
PCM CARD slot
1-3.
Afivfaii'l O^AMI
ZNC
When
a card is inserted, the R
-
8M
will
check both the
validity
of the card and
whether
or not it has
been
inserted correctly.
Check ing
Card. .
.
This card can be used.
Check ing C-arcl
Check
OK
19 Card, . .
be used.
^^
19 Card- - -
I
'^
)K.
Make sure that the card is inserted all the
way.
Check ing
Card.
Data Error.
The wrong card has been inserted.
Immediately remove the card to avoid
malfunctions.
Check in'3 Card. . .
Uirong
Card.
U

Roland R-8M Specifications

General

Brand	Roland
Model	R-8M
Category	Recording Equipment
Language	English