Roland TD-12 User Manual

42
Chapter 4. Effect Settings
You can choose the type of room where the drums are to be
played and modify the sound.
fig.04-005_70
1. Press [AMBIENCE].
[AMBIENCE] lights.
2. Press [F2]–[F4] or [CURSOR] to select the
parameter.
3. Use [+/-] or [VALUE] to adjust the setting.
4. Press [F1] to turn the ambience on.
* Pressing [F5 (H & R)] in the [F4 (AMB SND)] setting screen,
you can choose to set the head and rim simultaneously or
individually.
The multi-effects allow you to further customize your sound
and also provides a choice of output configurations.
fig.04-006_70
1. Hold down [SHIFT] and press [AMBIENCE].
[AMBIENCE] lights.
2. Press [F2], [F3], or [CURSOR] to select the
parameter.
3. Use [+/-] or [VALUE] to adjust the setting.
4. Press [F1] to turn the multi-effects on.
* Pressing [F5 (H & R)] in the [F3 (MFX SND)] setting screen,
you can choose to set the head and rim simultaneously or
individually.
Ambience [AMBIENCE]
Parameter Value Description
[F2 (TYPE)]
Room Type BEACH,
LIVING ROOM,
BATH ROOM,
STUDIO,
GARAGE,
LOCKER ROOM,
THEATER, CAVE,
GYMNASIUM,
DOME STADIUM
Type of ambience
Level 0–127 Total ambience level
[F3 (ROOM)]
Room Size TINY, SMALL,
MEDIUM,
LARGE, HUGE
5 size available
Wall Type WOOD, PLAS-
TER, GLASS
Wall material
Mic Position LOW, HIGH Ambience mic posi-
tion
Room Shape 0–100 Shape of the room
[F4 (AMB SND)]
Send Level
0–127 Ambience send level
for each instrument
Multi-Effects
[SHIFT] + [AMBIENCE]
Parameter Value Description
[F2 (MFX)]
Type DELAY,
PANNING DELAY,
FLANGER,
PHASER,
CHORUS
Type of multi-
effects
Level 0–127 Total effect lev-
el
[F3 (MFX SND)]
Send Level 0–127 Effect SEND
level for each
instrument
TD-12_e.book 42 ページ ２００７年８月８日 水曜日 午後１時２０分

Roland TD-12 Specifications

General

Brand	Roland
Model	TD-12
Category	Drums
Language	English