50
Using the Pads to Play Songs
The pads can also be set so that they start the performance of songs when
struck (
Pad Pattern function
).
This function is available only with electronic drums.
The Pad Pattern function is already selected in Drum Kit #8, “1ManBand+.”
Use this kit to try out this function.
fig.Q-024
1
Press [KIT].
[KIT] lights, and the “DRUM KIT” screen appears.
fig.Q-025ai
2
Press [+] or [-] to select Drum Kit #14.
fig.Q-026_50
3
Playback of the song begins when the following pads are struck.
1 KICK:
You can play the bass-line note by note (step by step) with your kick drum.
9 CRASH1 Rim:
The chords progress when you strike the pad.
• Make the following
settings when selecting
the Pad Pattern function
yourself.
“Pad Ptn (Pad Pattern)”
(KIT/CONTROL/Pad
Ptn;
p. 63
), “Pad Ptn
Velo (Pad Pattern
Velocity)” (KIT/
CONTROL/Pad Ptn
Velo;
p. 63
)
•
The following are
auxiliary functions
available when you use
songs in which Tap
Playback or One Shot
Playback is specified.
“Quick Play”
(SONG/COMMON/
Quick Play; p. 86),
“Reset Time”
(SONG/COMMON/
Reset Time; p. 86),
“Tap Exc Sw (Tap
Exclusive Switch”
(SONG/COMMON/
Tap Exc Sw; p. 86)
The following drum kits
use the Pad Pattern
function.
• #5 “LtnPerc+”
• #7 “TblaTun+”
• #8 “1ManBnd+”
•#10 “Guitars+”
Refer to “Drum Kit List” (p.
118) to find other drum
kits. (Kit names with “+”
uses the Pad Pattern
function.)
1
2
TD-6KV_e.book 50 ページ ２００５年１月２４日 月曜日 午後７時４分
To Next Page
Loading...
Need help?
General
