131
Chapter 8 Other Settings and Checking Status
Chapter 8
10.Press [EXIT] to return to the PERFORM/GM PLAY page.
Making MIDI-Related
Settings
Setting the MIDI Channel
The XV-3080 produces sound and can change its internal
settings in response to MIDI messages that it receives from
other devices. In order for this to occur, it is necessary to
match the MIDI channels of the transmitting device (MIDI
keyboard etc.) to the XV-3080’s MIDI reception channels.
Patch/Rhythm Set
When using an external MIDI device – such as a MIDI
keyboard – to play a Patch or Rhythm Set, use the following
procedure to set up the XV-3080 so that it can switch Patches
or Rhythm Sets in response to received MIDI messages.
1. Press [SYSTEM] to make its indicator light.
2. Press the [MIDI] function select button (displayed in
gray) to make its button indicator light.
3. Use [ ]/[ ] to select the setting page for “Patch/Rhy
Rx Ch.”
4. Press [ ]/[ ] to move the cursor to the number
underneath “Patch/Rhy Rx Ch.”
5. Use the VALUE dial or [INC] / [DEC] to select the
desired MIDI reception channel.
6. Press [EXIT] to return to the previous page.
Parts of a Performance
Refer to “Establishing a Part’s MIDI Settings (MIDI) (p.
106).”
Selecting Performances Using MIDI
Messages
If you wish to use MIDI messages from an external device to
select Performances on the XV-3080, you must set the
transmission channel of the external device to match the XV-
3080’s Perform Ctrl Ch – the Performance Control channel.
* When you perform a Factory Reset operation, Perform Ctrl
Ch is reset to “16.” If you wish to change this, use the
following procedure.
1. Press [SYSTEM] to make its indicator light.
2. Press the [MIDI] function select button (displayed in
gray) to make its button indicator light.
<Equal Temperament>
This scale divides an octave into 12 equal parts using the
tuning system that is most widely used in Western
music.
<Pure Temperament (Tonic is C)>
With this tuning, the three fundamental chords sound
richer compared to equal temperament. This effect only
applies to one key, and transposition can produce less-
pleasing results.
<Arabian Scale>
In this scale, E and B are a quarter note lower and C#, F#
and G# are a quarter-note higher compared to equal
temperament. The intervals between G and B, C and E, F
and G#, Bb and C#, and Eb and F# have a natural third –
the interval between a major third and a minor third. On
the XV-3080, you can use Arabian temperament in the
three keys of G, C and F.
Example:
Note Equal Pure Arabian scale
name temperament temperament
(tonic C)
C0 0-6
C# 0 -8 +45
D 0 +4 -2
Eb 0 +16 -12
E 0 -14 -51
F 0 -2 -8
F# 0 -10 +43
G 0 +2 -4
G# 0 +14 +47
A 0 -16 0
Bb 0 +14 -10
B 0 -12 -49
To Next Page
Loading...
Need help?
General
