Never remove or damage lead seals.
Only use flue gas systems approved for
condensing operation.
Only use the burner when an adequate
supply of combustion air is assured. This
is automatically assured, if the Gas-
SolarUnit/GasCompactUnit is operated in
balanced flue mode with a concentric
balanced flue system sized in accordance
with the ROTEX standard; there are no
other conditions specified for the
installation room.
Without balanced flue system, never
operate the burner in rooms with
aggressive vapours (e.g. hair spray,
trichloroethylene, tetrachlormethane),
severely dusty (e.g. workshops) or highly
humid conditions (e.g. laundries). A
ventilation aperture to the outside
measuring at least 150 cm
2
must be
provided.
Prior to the commissioning, fill the cylinder
(unpressurised area) with water,
otherwise flue gas could enter the
installation room.
Also carefully observe all warnings
identified in the following chapters with
the -symbol or other warning symbols.
Any modification of the equipment can
result in dangerous conditions. Such
modifications are therefore only
permissible with the written authorisation
from ROTEX.
General warranty terms
ROTEX is liable for all material and
manufacturing faults in line with this
statement.
Within the warranty period, ROTEX will repair
the equipment free of charge through an
authorised contractor.
ROTEX reserves the right to supply
replacement equipment. The warranty only
applies if the equipment has verifiable been
correctly installed by a qualified contractor.
As verification, we strongly recommend that
the installation and instruction form supplied
is completed and returned to ROTEX.
Warranty periods
The warranty period commences with the date
of installation (invoice date of the installing
contractor), but no later than six months after
the date of manufacture (invoice date). The
warranty period will not be extended by the
return of the equipment for repair or
replacement.
Warranty: 2 years
Warranty exclusions
Non-authorised interference with the equip-
ment, incorrect installation and modification of
the equipment result in the immediate loss of
any warranty claim.
All despatch and transport losses are excluded
from the warranty.
The warranty explicitly excludes all
consequential losses, in particular costs
associated with the removal and installation of
the equipment.
All other costs, in particular claims for
compensation, are excluded.
The warranty does not cover parts that are
subject to normal wear and tear (acc. to the
manufacturer’s definition), e.g. indicators,
switches, fuses).
[ 4 ]
DECLARATION OF CONFORMITY
for the condensing heating centres
ROTEX GasSolarUnit and ROTEX GasCompactUnit
We, ROTEX GmbH, declare in sole responsibility
that the following product
Product Part no.
ROTEX GasSolarUnit GSU 25 15 70 10
ROTEX GasSolarUnit
LPG GSU 25 F 15 70 20
ROTEX GasSolarUnit GSU 35 15 70 21
ROTEX GasSolarUnit GSU 35
LPG GSU 35 F 15 70 23
ROTEX GasCompactUnit GCU 25 15 70 30
ROTEX GasCompactUnit
LPG GCU 25 F 15 70 35
ROTEX GasCompactUnit GCU 35 15 70 40
ROTEX GasCompactUnit
LPG GCU 35 F 15 70 45
with the product ID CE-0085 BM0065
complies, in its standard form, with the following
European Directives:
89/336/EEC Electromagnetic
Compatibility
90/396/EEC EC Gas Equipment
Directive
73/23/EEC EC Low Voltage Directive
92/42/EEC EC Efficiency Directive
Güglingen, 1.7.2005 Dr.-Ing. Franz Grammling
To Next Page
Loading...
Need help?
General
