Ruijie RG-AP820-L(V2) Series User Manual

·
6 Troubleshooting
6.1 Troubleshooting Flowchart
6.2 Troubleshooting
LED does not light up after the AP is powered on
1) If you use PoE power supply, verify that the power source is IEEE 802.11af compliant, and then verify that the cable
is connected properly.
2) If you use a power adapter, verify that the power adapter is connected to an active power outlet, and then verify that
the power adapter works properly.
Ethernet port is not working after the Ethernet port is connected
Verify that the device at the other end of the Ethernet cable is working properly. And then verify that the Ethernet cable is
capable of providing the required data rate and is properly connected.
Wireless client cannot find the AP

Ruijie RG-AP820-L(V2) Series Specifications

General

Brand	Ruijie
Model	RG-AP820-L(V2) Series
Category	Wireless Access Point
Language	English