Ruijie RG-AP820-L(V2) Series User Manual

·
Figure 3-6 Mounting the AP on the Bracket
When mounting the AP on wall, keep the “Ruijie” logo upright during the installation.
The square feet should fit easily into the mounting slots. Do not forcibly push the AP into the slots.
After installation, verify that the AP is securely fastened.
3.5 Removing the Access Point
1. If the AP is installed on the wall, hold the AP in your hands and push it upward and away from the bracket in the LAN
port direction.
Figure 3-10 Removing the Wall-Mount AP
2. If the AP is installed on the ceiling, hold the AP in your hands and push it sideward. And attempt to push it along the
direction of the LAN port.

Ruijie RG-AP820-L(V2) Series Specifications

General

Brand	Ruijie
Model	RG-AP820-L(V2) Series
Category	Wireless Access Point
Language	English