load the breadmaker
30 Clean any spillage off the outside of the loaf tin.
a) spillage inside the machine will burn on to the surfaces
b) spillage on the element will reduce its life
31 Lower the loaf tin into the breadmaker.
32 If it won’t sit on the drive, lift it out, turn the drive slightly (less than ¼ of a turn), and try again.
33 If you spill, take the loaf tin out and clean up the spillage.
34 Close the lid.
power up
36 Plug the breadmaker into the wall socket (switch the socket on, if it’s switchable).
a) the breadmaker will beep
b) the display shows 1P (program 1, with medium crust), then 3:20 (the program duration)
choose your program from the menu
38 Use the menu Z button to change the program number to the one you want – they are:
1 basic
2 French
3 wholewheat (no movement during the 30 minutes preheating phase)
4 cake
5 sweet
6 dough
7 jam
8 sandwich
9 gluten free
10 fastbake I
11 fastbake II
12 speciality
39 The time will change as you cycle through the program numbers – ignore it for now.
crust colour
40 Use the crust colour button to move the arrow on the bottom of the display to the crust
colour you want – the options are: light (display = L ), medium (display = P ), dark
(display = H ).
41 The crust colour button only works with the basic, French, wholewheat, and sweet programs.
size i j k
42 Use the size button to move the arrow on the top of the display to the size you want – the
options are: small i (500g), medium j (750g), large k (1kg).
43 These sizes are approximate – think of them as small, medium, and large.
44 The size button only works with the basic, French, wholewheat, sweet, and sandwich
programs.
program buttons
No. name colour size timer
1 basic
² ² ²
2 French
² ² ²
3 wholewheat
² ² ²
4 cake
5 sweet
² ² ²
6 dough
program buttons
No. name colour size timer
7 jam
8 sandwich
²
9 gluten free
10 fastbake I
11 fastbake II
12 speciality
To Next Page
Loading...
Need help?
General
