Ryobi ART3 User Manual

1
WARNING
This router table can use Ryobi router
ERT1250VN, ERT241200 and ERT1500VK. Do
not use cutters with undersized shanks.
Undersized shanks will not tighten properly and
could be thrown from the tool, causing injury.
INTRODUCTION
Your router table has many features for making router
operations more pleasant and enjoyable. Safety,
performance and dependability have been given top
priority in the design of this router table making it easy to
maintain and operate.
CAUTION:
Carefully read through this entire Operator's
Manual and the entire router Operator’s Manual
before using your new router table. Pay close
attention to the Rules for Safe Operation and all
Safety Alert Symbols including Danger, Warning
and Caution. If you use your router table properly
and only for what it is intended, you will enjoy
years of safe, reliable service.
The operation of any tool can result in
foreign objects being thrown into your
eyes, which can result in severe eye
damage. Before beginning power tool
operation, always wear safety goggles
or safety glasses with side shields and a full face shield
when needed. We recommend Wide Vision Safety Mask
for use over eyeglasses or standard safety glasses with
side shields.
RULES FOR SAFE OPERATION
READ ALL INSTRUCTIONS
■ Know your power tool. Safe operation of this power
tool requires that you read and understand this
operator’s manual, the Operator’s Manual for the
router and all labels affixed to the tool. Learn the
applications and limitations as well as the potential
hazards.
WARNING
Do not connect your router or router table to a
power source until you have assembled and
adjusted the router table as described in this
manual and have read and understood all
precautions and operating instructions in the
manual and printed on the tool.
WARNING
When using electric tools, basic safety precautions
should always be followed to reduce the risk of fire,
electric shock and personal injury. Use common
sense. Some of these basic safety precautions
include the following:
■ Always keep all guards in place and in good
working order.
■ Remove adjusting keys and wrenches. Get in the
habit of checking to see that hex keys and adjusting
wrenches are removed from the tool before turning it
on.
■ Keep the work area clean. Cluttered work areas and
work benches invite accidents.
■ Do not use in dangerous environments. Do not
use power tools near petrol or other flammable
liquids, in damp or wet locations or expose them to
rain. Keep the work area well lit.
■ Keep children away from power tools. All visitors
should be kept at a safe distance from the work area.
■ Make the workshop child-proof with padlocks and
master switches or by removing starter keys.
■ Do not force the tool. It will do the job better and
safer at the rate for which it was designed.
■ Us e the right tool. Do not force the tool or
attachment to do a job for which it was not designed.
■ Wear proper apparel. Do not wear loose clothing,
gloves, neckties, rings, bracelets or other jewelry that
could get caught in moving parts. Non-slip footwear is
recommended. Wear protective covering over long
hair.
■ Always wear safety glasses with side shields.
Everyday eyeglasses have only impact resistant
lenses; they are not safety glasses.
■ Protect your lungs.Wear a face or dust mask if the
cutting operation is dusty.
■ Protect your hearing. Wear ear muffs or plugs
during periods of extended use.
■ Secure the work. Use clamps or a vise to hold the
work when practical. It’s safer than using your hand
and frees both hands to operate the tool.
■ Do not overreach. Keep proper footing and balance
at all times.
■ Maintain the tool with care. Keep blades sharp and
clean for the best and safest performance. Follow
instructions for lubricating and changing accessories.
■ Disconnect power tools before servicing or before
changing accessories such as blades, bits and
cutters.
ART3-manual(RTA).qxd 9/10/04 4:23 PM Page 1

Ryobi ART3 Specifications

General

Brand	Ryobi
Model	ART3
Category	Tools
Language	English