EasyManua.ls Logo

Ryobi PBC3046E User Manual

Ryobi PBC3046E
24 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #19 background imageLoading...
Page #19 background image
19
The fuel cap contains a non-serviceable filter and a check
valve. A clogged fuel filter will cause poor engine perfor-
mance. If performance improves when the fuel cap is
loosened, the check valve may be faulty or the filter
clogged. Replace fuel cap if required.
SPARKING PLUG
This engine uses a Champion RCJ-6Y with 0.63 mm
(0.025 in) electrode gap. Use an exact replacement and
replace annually.
WARNING:
A leaking fuel cap is a fire hazard and must be
replaced immediately.
FUEL CAP
MAINTENANCE
STORAGE (1 MONTH OR LONGER)
1. Drain all fuel from tank into a container approved for
petrol. Run engine until it stops.
2. Clean all foreign material from the trimmer. Store it in a
well-ventilated place that is inaccessible to children.
Keep away from corrosive agents such as garden
chemicals and de-icing salts.
3. Cover the blade with the blade protector before storing
the unit, or during transport.
4. Abide by all ISO and local regulations for the safe
storage and handling of petrol. Excess fuel should be
used up in other 2-cycle engine-powered equipment.
Question and Answer IconNeed help?

Do you have a question about the Ryobi PBC3046E and is the answer not in the manual?

Ryobi PBC3046E Specifications

General IconGeneral
BrandRyobi
ModelPBC3046E
CategoryTrimmer
LanguageEnglish

Summary

SAFETY

General Safety Rules

Comprehensive guidelines for safe operation and user protection.

Specific Safety Rules for Trimmer Use

Safety precautions unique to operating the trimmer attachment.

Specific Safety Rules for Brushcutter Use

Safety precautions specific to operating the brushcutter attachment.

UNPACKING

ASSEMBLY

Connecting Power Head and Attachment

Guide to connecting the power unit to the trimmer shaft via the coupler.

Attaching the Handle

Guide to installing the main handle for control and safety.

ASSEMBLY

ASSEMBLY

OPERATION

Fueling and Refuelling Procedures

Safe handling, mixing, and filling of fuel for the trimmer/brushcutter.

Operating the Brushcutter

Techniques for cutting with the blade, including safety and blade use.

Starting and Stopping the Engine

Step-by-step guide for starting and stopping the engine.

Operating the Trimmer

Techniques for cutting, advancing string, and general trimmer operation.

OPERATION

MAINTENANCE

MAINTENANCE

TROUBLESHOOTING

Engine Will Not Start

Solutions for engine starting problems and no spark/fuel issues.

Engine Performance Issues

Troubleshooting for acceleration, smoke, and idle speed problems.

WARRANTY AND SAFETY DIRECTIVE

Related product manuals