1
INTENDED USE
!
"
WARNING
#
$
WARNING
% &
'
"
$
GENERAL POWER TOOL SAFETY WARNINGS
WARNING
Read all safety warnings and all instructions.
Save all warnings and instructions for future reference
()
*+*+
WORK AREA SAFETY
Keep work area clean and well lit.%
Do not operate power tools in explosive
atmospheres, such as in the presence of flammable
liquids, gases or dust.
Keep children and bystanders away while operating
a power tool. "
ELECTRICAL SAFETY
Power tool plugs must match the outlet. Never
modify the plug in any way. Do not use any adapter
plugs with earthed (grounded) power tools.
,
Avoid body contact with earthed or grounded
surfaces, such as pipes, radiators, ranges and
refrigerators.
Do not expose power tools to rain or wet conditions.
#
Do not abuse the cord. Never use the cord for
carrying, pulling or unplugging the power tool.
Keep cord away from heat, oil, sharp edges or
moving parts."
When operating a power tool outdoors, use an
extension cord suitable for outdoor use. ,
If operating a power tool in a damp location is
unavoidable, use a residual current device (RCD)
protected supply.,-%"
PERSONAL SAFETY
Stay alert, watch what you are doing and use
common sense when operating a power tool. Do
not use a power tool while you are tired or under the
influence of drugs, alcohol or medication.&
'
Use personal protective equipment. Always wear
eye protection.
'
Prevent unintentional starting. Ensure the switch
is in the off-position before connecting to power
source and/or battery pack, picking up or carrying
the tool.%
Remove any adjusting key or wrench before turning
the power tool on.&
'
Do not overreach. Keep proper footing and balance
at all times.
.
Dress properly. Do not wear loose clothing or
jewellery. Keep your hair, clothing and gloves away