PRODUCT SPECIFICATIONS
2
2
2
REPLACEMENT PART (BAR AND CHAIN)
according to above combinations.
VIBRATION LEVEL
The declared vibration value has been measured with a
standard test method and may be used to compare one
tool with another.
The declared vibration value may be used in a preliminary
assessment of exposure.
The vibration emission during actual use of power tool can
differ from the declared total value depending on the ways
in which the tool is used.
Identify safety measures to protect yourself based on an
estimation of exposure in the actual conditions of use,
taking account of all parts of the operating cycle such as the
times when the tool is switched off and when it is running
idle in addition to the trigger time.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
